US Long-Term Ecological Research Network

North Temperate Lakes LTER Regional Survey Zooplankton 2015 - current

Abstract
The Northern Highlands Lake District (NHLD) is one of the few regions in the world with periodic comprehensive water chemistry data from hundreds of lakes spanning almost a century. Birge and Juday directed the first comprehensive assessment of water chemistry in the NHLD, sampling more than 600 lakes in the 1920s and 30s. These surveys have been repeated by various agencies and we now have data from the 1920s (UW), 1960s (WDNR), 1970s (EPA), 1980s (EPA), 1990s (EPA), and 2000s (NTL). The 28 lakes sampled as part of the Regional Lake Survey have been sampled by at least four of these regional surveys including the 1920s Birge and Juday sampling efforts. These 28 lakes were selected to represent a gradient of landscape position and shoreline development, both of which are important factors influencing social and ecological dynamics of lakes in the NHLD. This long-term regional dataset will lead to a greater understanding of whether and how large-scale drivers such as climate change and variability, lakeshore residential development, introductions of invasive species, or forest management have altered regional water chemistry. Zooplankton samples were taken at approximately the deepest part of each lake, via a vertical tow with a Wisconsin net. Count of individuals and presence absence data for all lakes in study region are provided here.
Contact
Core Areas
Dataset ID
381
Date Range
-
Maintenance
ongoing
Methods
Each zooplankton sample was taken at approximately the deepest part of each lake, via a vertical tow with a Wisconsin net (20cm diameter mouth, 80µ mesh) lowered to 1 meter above the bottom of a lake and then pulled up slowly at a rate of about 3 seconds per meter. Contents of the net were preserved in 4-oz jars with 95% ethanol. One sample was taken from each lake. Samples were collected by the Regional Lakes summer sampling crew in June 2015.
Version Number
1

Long-term fish size data for Wisconsin Lakes Department of Natural Resources and North Temperate Lakes LTER 1944 - 2012

Abstract
This dataset describes long-term (1944-2012) variations in individual fish total lengths from Wisconsin lakes. The dataset includes information on 1.9 million individual fish, representing 19 species. Data were collected by Wisconsin Department of Natural Resource fisheries biologists as part of routine lake fisheries assessments. Individual survey methodologies varied over space and time and are described in more detail by Rypel, A. et al., 2016. Seventy-Year Retrospective on Size-Structure Changes in the Recreational Fisheries of Wisconsin. Fisheries, 41, pp.230-243. Available at: http://afs.tandfonline.com/doi/abs/10.1080/03632415.2016.1160894
Contact
Core Areas
Creator
Dataset ID
357
Date Range
-
Maintenance
completed
Methods
Fisheries surveys of inland lakes and streams in Wisconsin have been conducted by the Wisconsin Department of Natural Resources (WDNR) professionals and its predecessor the Wisconsin Conservation Department for >70 y. Standard fyke net and boat electrofishing surveys tend to dominate the fisheries surveys and data collected. Most fyke net data on certain species (e.g., Walleye Sander vitreus and Muskellunge Esox masquinongy) originates from annual spring netting surveys following ice-out. These data are used for abundance estimates, mark and recapture surveys for estimating population sizes, and egg-take procedures for the hatcheries. Boat-mounted boom and mini-boom electrofishing surveys became increasingly common in the late 1950s and 1960s. Boat electrofishing surveys have typically been conducted during early summer months (May and June), but some electrofishing survey data are also collected in early spring as part of walleye and muskellunge mark-recapture surveys. Summer fyke netting surveys have been collected more sporadically over time, but were once more commonly used as a panfish survey methodology. Surveys were largely non-standardized. Thus, future users and statistical comparisons utilizing these data should acknowledge the non-standard nature of their collection. More in-depth description of these data can be found in Rypel, A. et al., 2016. Seventy-Year Retrospective on Size-Structure Changes in the Recreational Fisheries of Wisconsin. Fisheries, 41, pp.230-243. Available at: http://afs.tandfonline.com/doi/abs/10.1080/03632415.2016.1160894
Version Number
3

Long-term fish abundance data for Wisconsin Lakes Department of Natural Resources and North Temperate Lakes LTER 1944 - 2012

Abstract
This dataset describes long-term (1944-2012) variations in the relative abundance of fish populations representing nine species in Wisconsin lakes. Data were collected by Wisconsin Department of Natural Resource fisheries biologists as part of routine lake fisheries assessments. Individual survey methodologies varied over space and time and are described in more detail by Rypel, A. et al., 2016. Seventy-Year Retrospective on Size-Structure Changes in the Recreational Fisheries of Wisconsin. Fisheries, 41, pp.230-243. Available at: http://afs.tandfonline.com/doi/abs/10.1080/03632415.2016.1160894
Contact
Core Areas
Creator
Dataset ID
356
Date Range
-
Maintenance
completed
Methods
Fisheries surveys of inland lakes and streams in Wisconsin have been conducted by the Wisconsin Department of Natural Resources (WDNR) professionals and its predecessor the Wisconsin Conservation Department for >70 y. Standard fyke net and boat electrofishing surveys tend to dominate the fisheries surveys and data collected. Most fyke net data on certain species (e.g., Walleye Sander vitreus and Muskellunge Esox masquinongy) originates from annual spring netting surveys following ice-out. These data are used for abundance estimates, mark and recapture surveys for estimating population sizes, and egg-take procedures for the hatcheries. Boat-mounted boom and mini-boom electrofishing surveys became increasingly common in the late 1950s and 1960s. Boat electrofishing surveys have typically been conducted during early summer months (May and June), but some electrofishing survey data are also collected in early spring as part of walleye and muskellunge mark-recapture surveys. Summer fyke netting surveys have been collected more sporadically over time, but were once more commonly used as a panfish survey methodology. Surveys were largely non-standardized. Thus, future users and statistical comparisons utilizing these data should acknowledge the non-standard nature of their collection. More in-depth description of these data can be found in Rypel, A. et al., 2016. Seventy-Year Retrospective on Size-Structure Changes in the Recreational Fisheries of Wisconsin. Fisheries, 41, pp.230-243. Available at: http://afs.tandfonline.com/doi/abs/10.1080/03632415.2016.1160894
Version Number
5

Cascade Project at North Temperate Lakes LTER Core Data Zooplankton 1984 - 2016

Abstract
Zooplankton data from 1984-2016. Sampled approximately weekly with two net hauls through the water column (30 cm diameter net, 80 um mesh). There have been over eight zooplankton counters during this period, so species-level identifications (TAX, below) are not as consistent as those for some of the other datasets. Sampling Frequency: varies; Number of sites: 8
Core Areas
Dataset ID
355
Date Range
-
Maintenance
completed
Methods
Sampling:
Zooplankton were sampled approximately weekly with two net hauls through the water column (30 cm diameter net, 80 um mesh). Tows were taken at standard depths for almost all years. The standard depths are as follows: Peter, East Long, West Long, Crampton and Tuesday Lakes: 12m, Paul Lake: 8m, Ward Lake: 6m; exceptions are: for 2012 and beyond Tuesday Lake was sampled at 10m, Peter was sampled at 10m from 1984-1986, Paul was sampled at 7.5m in 1995. Samples were preserved with cold sugared formalin or Lugol's solution.
Version Number
16

Microbial Observatory at North Temperate Lakes LTER High-resolution temporal and spatial dynamics of microbial community structure in freshwater bog lakes 2005 - 2009 original format

Abstract
The North Temperate Lakes - Microbial Observatory seeks to study freshwater microbes over long time scales (10+ years). Observing microbial communities over multiple years using DNA sequencing allows in-depth assessment of diversity, variability, gene content, and seasonal/annual drivers of community composition. Combining information obtained from DNA sequencing with additional experiments, such as investigating the biochemical properties of specific compounds, gene expression, or nutrient concentrations, provides insight into the functions of microbial taxa. Our 16S rRNA gene amplicon datasets were collected from bog lakes in Vilas County, WI, and from Lake Mendota in Madison, WI. Ribosomal RNA gene amplicon sequencing of freshwater environmental DNA was performed on samples from Crystal Bog, North Sparkling Bog, West Sparkling Bog, Trout Bog, South Sparkling Bog, Hell’s Kitchen, and Mary Lake. These microbial time series are valuable both for microbial ecologists seeking to understand the properties of microbial communities and for ecologists seeking to better understand how microbes contribute to ecosystem functioning in freshwater.
Core Areas
Dataset ID
349
Date Range
-
Methods
Protocol available in methods section of: http://msphere.asm.org/content/2/3/e00169-17
Prior to collection, water temperature and dissolved oxygen concentrations are measured using a YSI 550a. The ranges of the epilimnion and hypolimnion are determined based on the location of the thermocline (where temperature/oxygen is changing the fastest). The two layers are collected separately in 1 meter increments using an integrated water column sampler. Water samples are taken back to the lab, shaken thoroughly, and filtered via peristaltic pump through 0.22 micron filters (Pall Supor). Filters are temporarily stored at -20C after collection and then transferred to -80C after transport on dry ice from Trout Lake Station to UW-Madison. Nutrient samples are collected bi-weekly following standard LTER protocols. DNA is extracted from filters using a FASTDNA SpinKit for Soil with minor modifications. (In cases of low yield or specialized sequencing methods, a phenol-chloroform extraction is used instead). The protocol for sequencing and analysis of data varies by year and by sub-project.
Version Number
4

North Temperate Lakes LTER Regional Survey Macrophytes Plant Index 2015 - current

Abstract
The Northern Highlands Lake District (NHLD) is one of the few regions in the world with periodic comprehensive water chemistry data from hundreds of lakes spanning almost a century. Birge and Juday directed the first comprehensive assessment of water chemistry in the NHLD, sampling more than 600 lakes in the 1920s and 30s. These surveys have been repeated by various agencies and we now have data from the 1920s (UW), 1960s (WDNR), 1970s (EPA), 1980s (EPA), 1990s (EPA), and 2000s (NTL). The 28 lakes sampled as part of the Regional Lake Survey have been sampled by at least four of these regional surveys including the 1920s Birge and Juday sampling efforts. These 28 lakes were selected to represent a gradient of landscape position and shoreline development, both of which are important factors influencing social and ecological dynamics of lakes in the NHLD. This long-term regional dataset will lead to a greater understanding of whether and how large-scale drivers such as climate change and variability, lakeshore residential development, introductions of invasive species, or forest management have altered regional water chemistry. The purpose of the macrophyte survey is to identify, and quantify the types of aquatic plants within the various 28 regional survey lakes. The macrophyte survey consists of sampling macrophyte plants using a metal rake attached to a 15ft pole at approximately 140 spatially resolved points on a lake that are spread out in a grid like fashion, equally spaced from each other. Sampling locations were chosen such that the maximum depth at which macrophytes were surveyed was equal to or less than 15ft of water. Macrophyte sampling occurs in the latter part of the summer (after July 10) to ensure that macrophytes have had adequate time to grow and our sampling efforts capture the typical summer macrophyte community in each lake. Macrophyte sampling in these 28 lakes is ongoing and will be repeated approximately once every six years.
Core Areas
Dataset ID
338
Date Range
-
Methods
the protocol employed here is based on:
Hauxwell, J., S. Knight, K. Wagner, A. Mikulyuk, M. Nault, M. Porzky and S. Chase . 2010. Recommended baseline monitoring of aquat ic plants in Wisconsin : sampling design, field and laboratory procedures, data entry and analys is, and applica tions. Wisconsin Department of Natural Resources Bureau of Science Services, PUB-SS-1068 2010. Madison, Wisconsin, USA.
Version Number
13

LTREB Biological Limnology at Lake Myvatn 2012-current

Abstract
These data are part of a long-term monitoring program in the central part of Myvatn that represents the dominant habitat, with benthos consisting of diatomaceous ooze. The program was designed to characterize import benthis and pelagic variables across years as midge populations varied in abundance. Starting in 2012 samples were taken at roughly weekly inervals during June, July, and August, which corresponds to the summer generation of the dominant midge,<em>Tanytarsus gracilentus</em>.
Creator
Dataset ID
296
Date Range
-
Maintenance
Ongoing
Metadata Provider
Methods
Benthic Chlorophyll Field sampling (5 samples) (2012, 2013)1. Take 5 cores from the lake2. Cut the first 0.75 cm (1 chip) of the core with the extruder and place in deli container. Label with date and core number.3. Place deli containers into opaque container (cooler) and return to lab. This is the same sample that is used for the organic matter analysis.In 2014, the method for sampling benthic chlorophyll changed. The calculation of chlorophyll was changed to reflect the different area sampled. Below is the pertinent section from the methods protocols. Processing after the collection of the sample was not changed.Take sediment samples from the 5 cores collected for sediment characteristics. Take 4 syringes of sediment with 10mL syringe (15.96mm diameter). Take 4-5cm of sediment. Then, remove bottom 2cm and place top 2cm in the film canister.Filtering1. Measure volume of material in deli container with 60mL syringe and record.2. Homogenize and take 1mL sample with micropipette. The tip on the micropipette should be cut to avoid clogging with diatoms. Place the 1mL sample in a labeled film canister. Freeze sample at negative 20 degrees Celsius unless starting methanol extraction immediately.3. Add 20mL methanol. This methanol can be kept cool in the fridge, although then you will need a second bottle of methanol for the fluorometer. Shake for 5 sec.4. After 6-18 hours, shake container for 5 sec.Fluorometer1. Allow the film canisters to sit at room temperature for approximately 15 min to avoid excessive condensation on the glass tubes. Shake tubes for 5 sec after removing from fridge but then be careful to let them settle before removing sample.2. Record the sample information for all of the film canisters on the data sheet.3. Add 4mL of sample to a 13x100mL glass tube.4. Insert the sample into the fluorometer and record the reading in the Fluor Before Acid column. The sample reading should be close to one of the secondary solid standards (42ug/L or 230ug/L), if not, dilute the sample to within 25 per cent of the secondary solid standards (30-54ug/L or 180-280ug/L). It is a good idea to quickly check 2mL of a sample that is suspected to be too high to get an idea if other samples may need to be diluted. If possible, read the samples undiluted.5. If a sample needs to be diluted, use a 1000 microLiter pipette and add 2mL of methanol to a tube followed by 2mL of undiluted sample. Gently invert the tube twice and clean the bottom with a paper towel before inserting it into the fluorometer. If the sample is still outside of the ranges above, combine 1 mL of undiluted sample with 3 mL of methanol. Be sure to record the dilution information on the data sheet.6. Acidify the sample by adding 120microLiters of 0.1 N HCl (30microLiters for every one mL of sample). Then gently invert the sample and wait 90 seconds (we used 60 seconds in 2012, the protocol said 90) before putting the sample into the fluorometer and recording the reading in the Fluor After Acid column. Be sure to have acid in each tube for exactly the same amount of time. This means doing one tube at a time or spacing them 30-60 seconds apart.7. Double check the results and redo samples, which have suspicious numbers. Make sure that the after-acidification values make sense when compared to the before acidification value (the before acid/after acid ratio should be approximately the same for all samples).Clean up1. Methanol can be disposed of down the drain as long as at least 50 times as much water is flushed.2. Rinse the film canisters and lids well with tap water and scrub them out with a bottle brush making sure to remove any remaining filter paper. Give a final rinse with distilled water. Pelagic Chlorophyll Field sampling (5 samples)1. Take 2 samples at each of three depths, 1, 2, and 3m with Arni&rsquo;s zooplankton trap. For the 1m sample, drop the trap to the top of the chain. Each trap contains about 2.5L of water when full. 2. Empty into bucket by opening the bottom flap with your hand.3. Take bucket to lab.Filtering1. Filter 1L water from integrated water sample (or until the filter is clogged) through the 47 mm GF/F filter. The pressure used during filtering should be low ( less than 5 mm Hg) to prevent cell breakage. Filtering and handling of filters should be performed under dimmed lighting.2. Remove the filter with forceps, fold it in half (pigment side in), and put it in the film canister. Take care to not touch the pigments with the forceps.3. Add 20mL methanol. This methanol can be kept cool in the fridge, although then you will need a second bottle of methanol for the fluorometer. Shake for 5 sec. and place in fridge.4. After 6-18 hours, shake container for 5 sec.5. Analyze sample in fluorometer after 24 hours.Fluorometer1. Allow the film canisters to sit at room temperature for approximately 15 min to avoid excessive condensation on the glass tubes. Shake tubes for 5 sec after removing from fridge but then be careful to let them settle before removing sample.2. Record the sample information for all of the film canisters on the data sheet.3. Add 4mL of sample to a 13x100mL glass tube.4. Insert the sample into the fluorometer and record the reading in the Fluor Before Acid column. The sample reading should be close to one of the secondary solid standards (42ug/L or 230ug/L), if not, dilute the sample to within 25 percent of the secondary solid standards (30-54ug/L or 180-280ug/L). It is a good idea to quickly check 2mL of a sample that is suspected to be too high to get an idea if other samples may need to be diluted. If possible, read the samples undiluted.5. If a sample needs to be diluted, use a 1000uL pipette and add 2mL of methanol to a tube followed by 2mL of undiluted sample. Gently invert the tube twice and clean the bottom with a paper towel before inserting it into the fluorometer. If the sample is still outside of the ranges above, combine 1 mL of undiluted sample with 3 mL of methanol. Be sure to record the dilution information on the data sheet.6. Acidify the sample by adding 120 microLiters of 0.1 N HCl (30 microLiters for every one mL of sample). Then gently invert the sample and wait 90 seconds (we used 60 seconds in 2012, the protocol said 90) before putting the sample into the fluorometer and recording the reading in the Fluor After Acid column. Be sure to have acid in each tube for exactly the same amount of time. This means doing one tube at a time or spacing them 30-60 seconds apart.7. Double check the results and redo samples, which have suspicious numbers. Make sure that the after-acidification values make sense when compared to the before acidification value (the before acid/after acid ratio should be approximately the same for all samples).Clean up1. Methanol can be disposed of down the drain as long as at least 50 times as much water is flushed.2. Rinse the film canisters and lids well with tap water and scrub them out with a bottle brush making sure to remove any remaining filter paper. Give a final rinse with distilled water. Pelagic Zooplankton Counts Field samplingUse Arni&rsquo;s zooplankton trap (modified Schindler) to take 2 samples at each of 1, 2, and 3m (6 total). For the 1m sample, drop the trap to the top of the chain. Each trap contains about 2.5L of water when full. Integrate samples in bucket and bring back to lab for further processing.Sample preparation in lab1. Sieve integrated plankton tows through 63&micro;m mesh and record volume of full sample2. Collect in Nalgene bottles and make total volume to 50mL3. Add 8 drops of lugol to fix zooplankton.4. Label bottle with sample date, benthic or pelagic zooplankton, and total volume sieved. Samples can be stored in the fridge until time of countingCounting1. Remove sample from fridge2. Sieve sample with 63 micro meter mesh over lab sink to remove Lugol&rsquo;s solution (which vaporizes under light)3. Suspend sample in water in sieve and flush from the back with squirt bottle into counting tray4. Homogenize sample with forceps or plastic pipette with tip cut off5. Identify (see zooplankton identification guide) using backlit microscope and count with multiple-tally counter. i. Set magnification so that you can see both top and bottom walls of the tray. ii. Change focus depth to check for floating zooplankton that must be counted as well.6. Pipette sample back into Nalgene bottle, add water to 50mL, add 8 drops Lugol&rsquo;s solution, and return to fridgeSubsamplingIf homogenized original sample contains more than 500 individuals in the first line of counting tray, you may subsample under the following procedure.1. Return original sample to Nalgene bottle and add water to 50mL2. Homogenize sample by swirling Nalgene bottle3. Collect 10mL of zooplankton sample with Hensen-Stempel pipette4. Empty contents of Hensen-Stempel pipette into large Bogorov tray5. Homogenize sample in tray with forceps or plastic pipette with tip cut off6. Identify (see zooplankton identification guide) using backlit microscope and count with multiple-tally counter. i. Set magnification so that you can see both top and bottom walls of the tray. ii. Change focus depth to check for floating zooplankton that must be counted, too! 7. Pipette sample back into Nalgene bottle, add water to 50mL, add 8 drops Lugol&rsquo;s solution, and return to fridge Benthic Microcrustacean Counts Field samplingLeave benthic zooplankton sampler for 24h. Benthic sampler consists of 10 inverted jars with funnel traps in metal grid with 4 feet. Set up on bench using feet (on side) to get a uniform height of the collection jars (lip of jar = 5cm above frame). Upon collection, pull sampler STRAIGHT up, remove jars, homogenize in bucket and bring back to lab. Move the boat slightly to avoid placing sampler directly over cored sediment.Sample preparation in lab1. Sieve integrated samples through 63 micrometer mesh and record volume of full sample2. Collect in Nalgene bottles and make total volume to 50mL3. Add 8 drops of lugol to fix zooplankton.4. Label bottle with sample date, benthic or pelagic zooplankton, and total volume sieved. Samples can be stored in the fridge until time of countingCounting1. Remove sample from fridge2. Sieve sample with 63 micrometer mesh over lab sink to remove Lugol&rsquo;s solution (which vaporizes under light)3. Suspend sample in water in sieve and flush from the back with squirt bottle into counting tray4. Homogenize sample with forceps or plastic pipette with tip cut off5. Identify (see zooplankton identification guide) using backlit microscope and count with multiple-tally counter. i. Set magnification so that you can see both top and bottom walls of the tray. ii. Change focus depth to check for floating zooplankton that must be counted, too!6. Pipette sample back into Nalgene bottle, add water to 50mL, add 8 drops Lugol&rsquo;s solution, and return to fridgeSubsamplingIf homogenized original sample contains more than 500 individuals in the first line of counting tray, you may subsample under the following procedure.1. Return original sample to Nalgene bottle and add water to 50mL2. Homogenize sample by swirling Nalgene bottle3. Collect 10mL of zooplankton sample with Hensen-Stempel pipette4. Empty contents of Hensen-Stempel pipette into large Bogorov tray5. Homogenize sample in tray with forceps or plastic pipette with tip cut off6. Identify (see zooplankton identification guide) using backlit microscope and count with multiple-tally counter. i. Set magnification so that you can see both top and bottom walls of the tray. ii. Change focus depth to check for floating zooplankton that must be counted, too! 7. Pipette sample back into Nalgene bottle, add water to 50mL, add 8 drops Lugol&rsquo;s solution, and return to fridge Chironomid Counts (2012, 2013) For first instar chironomids in top 1.5cm of sediment only (5 samples)1. Use sink hose to sieve sediment through 63 micrometer mesh. You may use moderate pressure to break up tubes.2. Back flush sieve contents into small deli container.3. Return label to deli cup (sticking to underside of lid works well).For later instar chironomids in the section 1.5-11.5cm (5 samples)4. Sieve with 125 micrometer mesh in the field.5. Sieve through 125micrometer mesh again in lab to reduce volume of sample.6. Transfer sample to deli container or pitfall counting tray.For all chironomid samples7. Under dissecting scope, pick through sieved contents for midge larvae. You may have to open tubes with forceps in order to check for larvae inside.8. Remove larvae with forceps while counting, and place into a vial containing 70 percent ethanol. Larvae will eventually be sorted into taxonomic groups (see key). You may sort them into taxonomic groups as you pick the larvae, or you can identify the larvae while measuring head capsules if chironomid densities are low (under 50 individuals per taxanomic group).9. For a random sample of up to 50 individuals of each taxonomic group, measure head capsule, see Chironomid size (head capsule width).10. Archive samples from each sampling date together in a single 20mL glass vial with screw cap in 70 percent ethanol and label with sample contents , Chir, sample date, lake ID, station ID, and number of cores. Chironomid Cound (2014) In 2014, the method for sampling chironomid larvae changed starting with the sample on 2014-06-27; the variable &quot;top_bottom&quot; is coded as a 2. In contrast to previous measurements, the top and bottom core samples were combined and then subsampled. Below is the pertinent section of the protocols.Chironomid samples should be counted within 24 hours of collection. This ensures that larvae are as active and easily identified as possible, and also prevents predatory chironomids from consuming other larvae. Samples should be refrigerated upon returning from the field.<strong>For first instar chironomids in top 1.5cm of sediment only (5 samples)</strong>1. Use sink hose to sieve sediment through 63&micro;m mesh. You may use moderate pressure to break up tubes.2. Back flush sieve contents using a water bottle into small deli container.3. Return label to deli cup (sticking to underside of lid works well).<strong>For larger instar chironomids in the section 1.5-11.5cm (5 samples)</strong>4. Sieve with 125&micro;m mesh in the field.5. Sieve through 125&micro;m mesh again in lab to reduce volume of sample and break up tubes.6. Transfer sample to deli container with the appropriate label.<strong>Subsample if necessary</strong>If necessary, subsample with the following protocol.a. Combine top and bottom samples from each core (1-5) in midge sample splitter.b. Homogenize sample thoroughly, collect one half in deli container, and label container with core number and &ldquo;1/2&rdquo;c. If necessary, split the half that remains in the sampler into quarters, and collect each in deli containers labeled with core number, &ldquo;1/4&rdquo;, and replicate 1 or 2d. Store all deli containers in fridge until counted, and save until all counting is complete&quot; Chironomid Size (head capsule width) 1. Obtain picked samples preserved in ethanol and empty onto petri dish.2. Sort larvae by family groups, arranging in same orientation for easy measurment.3. Set magnification to 20, diopter, x 50 times4. Take measurments for up to 50 or more individuals of each taxa. Round to nearest optical micrometer unit.5. Fill out data sheet for number of larvae in each taxa, Chironomid measurements for each taxa, date of sample, station sample was taken from, which core the sample came from, who picked the core, and your name as the measurer.6. Enter data into shared sheetSee &quot;Chironomid Counts&quot; for changes in sampling chironomid larvae in 2014.
Version Number
17

WDNR Yahara Lakes Fisheries: Fish Lengths and Weights 1987-1998

Abstract
These data were collected by the Wisconsin Department of Natural Resources (WDNR) from 1987-1998. Most of these data (1987-1993) precede 1995, the year that the University of Wisconsin NTL-LTER program took over sampling of the Yahara Lakes. However, WDNR data collected from 1997-1998 (unrelated to LTER sampling) is also included. In 1987 a joint project by the WDNR and the University of Wisconsin-Madison, Center for Limnology (CFL) was initiated on Lake Mendota. The project involved biomanipulation of fish communities within the lake, which was acheived by stocking game fish species (northern pike and walleye). The goal was to induce a trophic cascade that would improve the water clarity of Lake Mendota. See Lathrop et al. 2002. Stocking piscivores to improve fishing and water clarity: a synthesis of the Lake Mendota biomanipulation project. Freshwater Biology 47, 2410-2424. In collecting these data, the objective was to gather population data and monitor populations to track the progress of the biomanipulation. The data is dominated by an assesssment of the game fishery in Lake Mendota, however other Yahara Lakes and non-game fish species are also represented. A combination of gear types was used to gather the population data including boom shocking, fyke netting, mini-fyke netting, seining, and gill netting. Not every sampling year includes length and weight data from all gear types. The WDNR also carried out randomized, access-point creel surveys to estimate fishing pressure, catch rates, harvest, and exploitation rates. Five data files each include length-weight data, and are organized by the type of gear or method which was used to collect the data: 1) fyke, mini-fyke, and seine netting 2) boom shocking 3) gill netting (1993 only) 4)walleye age as determined by scale and spine analysis (1987 only), and 5) creel survey. The final data file contains creel survey information: number of anglers fishing the shoreline, and number of anglers that started and completed trips from public and private access points.
Core Areas
Dataset ID
279
Date Range
-
Metadata Provider
Methods
BOOM SHOCKING1987:A standard WDNR electrofishing boat was used on Lake Mendota set at 300 volts and 2.5 amps (mean) DC, with a 20 % duty cycle and 60 pulses per second. On all sampling dates two people netted fish, the total electrofishing crew was three people. Shocking was divided into stations. For each station, the actual starting and ending time was recorded. Starting and ending points of each station were plotted on a nap. A 7.5 minute topographic map (published 1983) and a cartometer was used to develop a standardized shoreline mileage numbering scheme. Starting at the Yahara River outlet at Tenney Park and measuring counterclockwise, the shoreline was numbered according to the number of miles from the outlet. The length of shoreline shocked for each station was determined using the same maps. The objectives of the fall 1987 electrofishing was: to gather CPE data for comparison with previous surveys of the lake; develop a database for relating fall electroshocker CPE to predator density; collect fall predator diet data; make mark-recapture population estimates of YOY predators; and determine year-class-strength of some nonpredators (yellow perch, yellow bass, and white bass).1993: Electrofishing was used to continue marking largemouth and smallmouth bass (because of low CPE in fyke nets), to recapture fish marked in fyke netting, and to mark and recapture walleyes ( less than 11.0 in.) on Lake Mendota. Four person crews electrofished after sunset from May 05 to June 03, 1993. A standard WDNR electrofishing boat was used, set at about 300 volts and 15.0 amps (mean) DC, with a 20 % duty cycle at 60 pulses per second. On all sampling dates two people netted fish; thus, CPE data are given as catch per two netter hour or mile. Shocking was divided into stations. For each station the actual starting and ending time and the generator s meter times was recorded. Starting and ending points of each station were plotted on a map. 7.5 minute topographic maps (published in 1983) were used in addition to a cartometer to develop a standardized shoreline mileage numbering scheme. Starting at the Yahara River outlet at Tenney Park and measuring counterclockwise the shoreline was numbered according to the number of miles from the outlet. The length of shoreline shocked for each station was determined using these maps. The 4 person electroshocker crews were used again from September 20 to October 19. Fall shocking had several objectives: to gather CPE data for comparison with previous surveys of the lake; develop a database for relating fall electroshocker CPE to piscivore density; and make mark recapture population estimates of young of year (YOY) piscivores.1997:5/13/1997-5/20/1997: Electrofishing was completed at night on lakes: Mendota, Monona, and Waubesa. A standard WDNR electrofishing boat was used, set from 320-420 volts and 16-22 amps DC, with a 20 % duty cycle at 50 pulses per second. Two netters were used for each shocking event. At a particular station, starting and ending times where shocking took place were recorded. The location of the designated shocking stations is unknown.9/23/1997-10/14/1997: Electrofishing was completed at night on Mendota, Monona, Waubesa, and Wingra. A standard WDNR electrofishing boat was used, set from 315-400 volts and 16-24 amps DC, with a 20% duty cycle at 60 pulses per second. Two netters were used for each shocking event. Starting and ending time at each shocking station was listed. The location of the designated shocking stations is unknown.1998:Electrofishing was completed at night on Mendota, Monona, Wingra, and Waubesa from 5/12/1998- 10/28/1998. A standard WDNR electrofishing boat was used, set from 240-410 volts and 15-22 amps DC, with a 20% duty cycle at 50-100 pulses per second. Two netters were used for each shocking event. Starting and ending time at each shocking station was listed. The location of the designated shocking stations is unknown. FYKE NETTING1987:Fyke nets were fished daily from March 17 to April 24, 1987 on Lake Mendota. The nets were constructed of 1.25 inch (stretch) mesh with a lead length of 50 ft. (a few 25 ft. leads were used). The hoop diameter was 3 ft. and the frame measured 3 ft. by 6 ft. Total length of the net was 28 ft. plus the lead length. Nets were set in 48 unknown locations. Initially, effort was concentrated around traditional northern pike spawning sites (Cherokee Marsh, Sixmile Creek, Pheasant Branch Creek, and University Bay). As northern pike catch-per-effort (CPE) declined some nets were moved onto rocky shorelines of the lake to capture walleyes. All adult predators (northern pike, hybrid muskie, largemouth and smallmouth bass, walleye, gar, bowfin, and channel catfish) captured were tagged and scale sampled. Measurements on non-predator species captured in fyke nets were made one day per week. This sampling was used to index size structure and abundance, and to collect age and growth data. In each net, total length and weight of 20 fish of each species caught was measured, and the remaining caught were counted.1993:Same methods as 1987, except fyke nets were fished from 4/8/1993-4/29/1993 on Lake Mendota. The 1993 fyke net data also specifies the &ldquo;mile&rdquo; at which the fyke net was set. This is defined as the number of miles from the outlet of the Yahara River at Tenney Park, moving counterclockwise around the lake. In addition, abundance and lengths of non-gamefish species captured in fyke nets were recorded one day per week. Six nets were randomly selected to sample for non-gamefish data. This sampling was used to index size structure and abundance, and to collect age and growth data. In each randomly selected net, total length and weight was measured for 20 fish of each species, and the remaining caught were counted.1998:There is no formal documentation for the exact methods used for fyke netting from 3/3/1998-8/12/1998 on Lake Mendota. However, given that the data is similar to data collected in 1987 and 1993 it is speculated that the same methods were used.MINI-FYKE NETTING1989:There is no formal documentation for the exact methods used for mini-fyke netting on Lake Mendota and Lake Monona from 7/26/1989-8/25/1989. However, given that the data is similar to data collected from 1990-1993 it is speculated that the same methods were used. In the sampling year of 1989, mini-fyke nets were placed at 22 different unknown stations.1990-1993: Mini-fyke nets were fished on Lake Mendota and Lake Monona during July-September at 20, 29, 13, and 15 sites per month during 1990, 1991, 1992, and 1993, respectively to estimate year-class strength, relative abundance, and size structure of fishes in the littoral zone. Nets were constructed with 3/16 in. mesh, 2 ft. diameter hoops, 2 ft. x 3 ft. frame, and a 25 ft. lead. Sites were comparable to seine sites used in previous surveys. Sites included a variety of substrate types and macrophyte densities. To exclude turtles and large piscivores from minifyke nets, some nets were constructed with approximately 2 in. by 2 in. mesh at the entrance to the net. Thus, mini-fyke net data are most accurate for YOY fishes, and should not be used to make inferences about fishes larger than the exclusion mesh size. 1997:There is no formal documentation for the mini-fyke methods which were used on Lake Waubesa and Lake Wingra from 9/16/1997-9/18/1997. However, given that the data is similar to data collected in 1989, and 1990-1993, it is speculated that the methods used during 1997 are the same. SEINE NETTING1989, 1993: Monthly shoreline seining surveys were conducted on Lake Mendota and Lake Monona during June through September to estimate year class-strength, relative abundance, and size structure of the littoral zone fish community. Twenty sites were identified based on previous studies. Sites included a variety of substrate types and macrophyte densities. Seine hauls were made with a 25ft bag seine with 1/8 inch mesh pulled perpendicular to shore starting from a depth of 1 m. Twenty fish of each species were measured from each haul and any additional fish were counted. Gill Netting (1993)Experimental gill nets were fished in weekly periods during June through August, 1993. Gill nets were used to capture piscivores for population estimates of fish marked in fyke nets. All nets were constructed of five 2.5-4.5 in. mesh panels, and were 125 ft. long. Nets set in water shallower than 10 ft. were 3ft. high or less; all others were 6ft. high or less. Sampling locations were selected randomly from up to three strata: 1) offshore reef sets, 2) inshore sets, 6.0-9.9 ft. deep, and 3) mid-depth sets, 10-29.9 ft. deep. The exact location at which the gill nets were set on the lake is unknown because the latitude and longitude values which were recorded by the WDNR are invalid. Temperature and dissolved oxygen profiles were used to monitor the development of the thermocline and guide net placement during July and August. After the thermocline was established nets were set out to the 30 ft. contour or to the maximum depth with dissolved oxygen greater than 2 ppm. Walleye Age: Scale and Spine Analysis (1987) Scales were taken from walleye that were shocked during the fall of 1987 electrofishing events on Lake Mendota. Scales were taken from 10 fish per one-inch length increment. The scales were removed from behind the left pectoral fin, and from the nape on the left side on esocids. In addition, the second dorsal spine was removed from 10 walleyes per sex and inch increment (to age and compare with scale ages for fish over 20 inches). CREEL SURVEYS1989:Fishing pressure, catch rates, harvest, and exploitation rates were estimated from a randomized, access-point creel survey. The schedule was stratified into weekday and weekend/holiday day types. Shifts were selected randomly and were either 07:00-15:00 h or 15:00-23:00 h. In addition, two 23:00-03:00 h shifts and two 03:00-07:00 h shifts were sampled per month to estimate the same parameters during night time hours. During the ice fishing season (January-February) 22 access points around Lake Mendota and upstream to the Highway 113 bridge were sampled. The clerk counted the number of anglers starting and completing trips during the scheduled stop at each access point. During openwater (March-December) 13 access points were sampled; 10 were boat ramps and 3 were popular shore fishing sites<strong>. </strong>At each of these sites, an instantaneous count of shore anglers was made upon arrival at the site, continuous counts of anglers starting and completing trips at public and private access points were made. Boat occupants and ice fishing anglers were only interviewed if they were completing a trip. Both complete and incomplete interviews were made of shore anglers. Number caught and number kept of each species, and percent of time seeking a particular species were recorded. All predators possessed by anglers were measured, weighed, and inspected for finclips and tags. We measured a random sample of at least 20 fish of each non-predator species per day.1990-1993: Same as 1989, except 23 access points were used during the ice fishing season. In addition, 13 access points were sampled during the openwater (May-December) season; 9 sites were boat ramps and 4 sites were popular shore fishing sites. 1994-1999: No formal documentation exists, but given the similarity in the data and consistency through the years; it is speculated tha tthe methods are the same.
Version Number
19

North Temperate Lakes LTER: Macrophyte Species at Quadrat Level - Trout Lake 1993 - current

Abstract
These data are collected to document and characterize the submersed macrophytes of Trout Lake, to evaluate the long-term stability of this component, and to interface with investigations of other compartments of the ecosystem. Four sites along the shoreline of Trout Lake have been sampled annually in August along permanent line transects. These are quadrat-species level data. This dataset only contains information on species that were present. It includes a row for every species-quadrat present. If a quadrat is missing, that quadrat was either empty or was not sampled. Sampling Frequency: annually during summer Number of sites: 4
Core Areas
Dataset ID
26
Date Range
-
Maintenance
ongoing
Metadata Provider
Methods
Sites are designated according to the NTL numbering scheme established for the shoreline of the south basin of Trout Lake and its islands. The four sites (Trout-07, 46.01809769, -89.65571661; Trout-31, 46.0430698, -89.67157974; Trout-50, 46.01729465, -89.69461296; Trout-56, 46.01921135, -89.6813004) used by the macrophyte component are also used in the NTL fish and crayfish sampling. The site descriptions specify a transect line along which presence or absence data is recorded for all macrophyte species. A 0.25 M2 ring placed at 1 meter intervals (except site 7 - 0.5 to 1 M depth where the ring is placed at 2 meter intervals) along the transect designates the sampling quadrat. Using SCUBA, species data are recorded along with the total number of quadrats encountered between the following depth intervals: 0.5-1 M, 1-2 M, 2-3 M and 3-5 M. These depth intervals have been permanently established with markers consisting of a commercial Earth Anchor set in the lake bottom with 2 floats secured to it near the bottom. Large boat bumpers are used on the anchors at 3 and 5 meters. Between 28 and 52 quadrats are examined within each depth interval at each site.
Pre-1987 Data. In 1987, permanent line transects were established at each of the sites. Biomass samples and line transects observed before 1987 were set by more general descriptions at the site and were not identical year to year.
Publication Date
Short Name
NTLMP06
Version Number
24

North Temperate Lakes LTER: Macrophyte Richness - Trout Lake 1993 - current

Abstract
These data are collected to document and characterize the submersed macrophytes of Trout Lake, to evaluate the long-term stability of this component, and to interface with investigations of other compartments of the ecosystem. Four sites along the shoreline of Trout Lake have been sampled annually in August along permanent line transects. These data are quadrat level data. This dataset includes a row for every quadrat sampled. The RICHNESS field contains the number of species present (set to zero if the quadrat was empty). If a row is missing, that quadrat was not sampled Sampling Frequency: annually during summer Number of sites: 4
Dataset ID
28
Date Range
-
Maintenance
ongoing
Metadata Provider
Methods
Sites are designated according to the NTL numbering scheme established for the shoreline of the south basin of Trout Lake and its islands. The four sites (Trout-07, 46.01809769, -89.65571661; Trout-31, 46.0430698, -89.67157974; Trout-50, 46.01729465, -89.69461296; Trout-56, 46.01921135, -89.6813004) used by the macrophyte component are also used in the NTL fish and crayfish sampling. The site descriptions specify a transect line along which presence or absence data is recorded for all macrophyte species. A 0.25 M2 ring placed at 1 meter intervals (except site 7 - 0.5 to 1 M depth where the ring is placed at 2 meter intervals) along the transect designates the sampling quadrat. Using SCUBA, species data are recorded along with the total number of quadrats encountered between the following depth intervals: 0.5-1 M, 1-2 M, 2-3 M and 3-5 M. These depth intervals have been permanently established with markers consisting of a commercial Earth Anchor set in the lake bottom with 2 floats secured to it near the bottom. Large boat bumpers are used on the anchors at 3 and 5 meters. Between 28 and 52 quadrats are examined within each depth interval at each site.
Pre-1987 Data. In 1987, permanent line transects were established at each of the sites. Biomass samples and line transects observed before 1987 were set by more general descriptions at the site and were not identical year to year.
Short Name
NTLMP08
Version Number
24
Subscribe to species composition