US Long-Term Ecological Research Network

Historical Plat Maps of Dane County Digitized and Converted to GIS (1962-2005)

Abstract
We constructed a time-series spatial dataset of parcel boundaries for the period 1962-2005, in roughly 4-year intervals, by digitizing historical plat maps for Dane County and combining them with the 2005 GIS digital parcel dataset. The resulting datasets enable the consistent tracking of subdivision and development for all parcels over a given time frame. The process involved 1) dissolving and merging the 2005 digital Dane County parcel dataset based on contiguity and name, 2) further merging 2005 parcels based on the hard copy 2005 Plat book, and then 3) the reverse chronological merging of parcels to reconstruct previous years, at 4-year intervals, based on historical plat books. Additional land use information such as 1) whether a structure was actually constructed (using the companion digitized aerial photo dataset), 2) cover crop, and 3) permeable surface area, can be added to these datasets at a later date.
Dataset ID
291
Date Range
-
Maintenance
Completed
Metadata Provider
Methods
Overview: Hard copy historical plat maps of Dane County in four year intervals from 1962to 2005 were digitized and converted to a GIS format using a process known as rectification, wherebycontrol points are set such that a point placed on the scanned image takes on the coordinates of thepoint chosen from the earliest GIS dataset, which for Dane County is from 2005. After a number ofcontrol points are set, the map is assigned the coordinates of the 2005 GIS dataset. In this way,the scanned plat map is now an image file with a distinct spatial location. Since the scanned platmaps do not have any attributes associated with the parcels, the third step is to assign attributesby working backwards from the 2005 GIS dataset. This process begins by making a copy of the 2005 GISdataset, then overlaying this new layer with the rectified scanned image. A subdivision choice isidentified where the parcel lines on the GIS layer are not in agreement with the scanned plat maps.The last step is to modify the copy of the 2005 GIS layer so that it matches the underlying plat map- in effect creating a historical GIS layer corresponding to the year of the plat map. When thelines that delineate a parcel appear in the GIS file but not the plat map, the multiple smallparcels in the 2005 GIS layer are merged together to represent the pre-subdivision parcel. Thisprocess is repeated for each historical year that plat maps are available. In the end, each timeperiod-1974 through 2000 in 4 year intervals-has a GIS file with all of the spatial attributes ofthe parcels.Land Atlas - Plat Books: The Land Atlas plat books were obtained for Dane County from theMadison Public Library, Stoughton Public Library and Robinson Map Library. With these materials onloan the pages were scanned at 150ppi in grayscale format; this process took place at the RobinsonMap Library. Once scanned, these images were georeferenced based on the 2000 digital parcel map.This process of rectification was done in Russell Labs using ESRI ArcMap 9.3. Control points such asroad intersections, were chosen to accurately georeference the 1997 scanned parcel map (1973 wasdone in this way as well). This process was done using a specific ArcGIS tool(View/Toolbars/Georeferencing). For the other years the scanned images were georeferenced based offthe four corners of the 1997 georeferenced scanned images. Georeferencing off the 1997 rectifiedimage allows for easier and quicker rectification but also facilitated detection of differencesbetween the scanned plats. The scanned image of the land ownership could be turned on and off foreasy comparison to the previous time set; these differences are the changes which were made on thedigital ownership map. We scanned and digitized the following years:Scanned plats: 1958, 1962, 1968, 1973, 1978, 1981, 1985, 1989, 1993, 1997, 2001, 2005Digitized plats: 1962, 1968, 1973, 1978, 1981, 1985, 1989, 1993, 1997, 2001, 2005Prepping the parcel Map: Digital parcel shapefiles for the years 2000 and 2005 wereprovided by the Dane County Land Information Office(http://www.countyofdane.com/lio/metadata/Parcels.htm) and were used as the starting reference.These datasets needed to be prepared for use. Many single parcels were represented by multiplecontiguous polygons. These were dissolved. (Multi-part, or non-contiguous polygons were notdissolved.) Here is the process to dissolve by NAME_CONT (contact name): Many polygons do not have acontact name. The majority of Madison and other towns do not have NAME_CONT, but most large parcelsdo. In order not to dissolve all of the parcels for which NAME_CONT is blank we did the following:Open the digital parcel shapefile and go to Selection/Select by Attributes. In this window choose thecorrect layer, chose method create new selection , scroll and double click NAME_CONT, then in thebottom both make sure it says [ "NAME_CONT" <>; ] (without brackets). This will select allpolygons which do not have an empty Name Contact attribute (empty value). From those polygonsselected they were aggregated based on the Name Contact field (parcels with the same NameContact were combined), where borders were contiguous. To do this the dissolve tool in DataManagement Tool/Generalization/Dissolve was used. Dissolve on field NAME_CONT and enter everyother field into the statistical fields menu. This was done without the multipart feature optionchecked, resulting in parcels only being combined when they share border. Keep these dissolvedpolygons highlighted. Once the dissolve process is complete use select by attributes tool again butthis time choose method of Add to Current Selection and say [ "NAME_CONT" = ]. This will provide adigital layer of polygons aggregated by name as well as nameless polygons to be manuallymanipulated.Parcel Map Manipulation: The goal from here was to, as accurately as possible, recreate adigital replica of the scanned parcel map, and aggregate up parcels with the same owner. This goalof replication is in regards to the linework as opposed to the owner name or any other informationin order to accurately capture the correct area as parcel size changed. This process of movingboundaries was independent of merging parcels. If individual scanned parcel boundaries are differentfrom the overlayed digital parcel shapefile, then the digital parcel linework must be changed. Asthis project utilizes both parcel shape and area, the parcels must be accurate. When mergingparcels, parcels with the same owner name, same owner connected on the plat map with an arrow, sameowner but separated by a road, or same owner and share a same point (two lots share a single pointat the corner) were merged to create a multi-part feature. Parcels with the same owner separated byanother parcel of a different owner with no points touching where not merged. This process ofreverse digitization was done using ArcMap. The already dissolved shapefile was copied to create onefile that was a historical record and one file to be edited to become the previous year (the nextyear back in time). With the digital parcel shapefile loaded, the rectified scanned plat maps werethen added. Once open, turn on the Editor Toolbar and Start Editing . The tools to use are thesketch tool and the merge tool. Quick keys where used (editor tool bar\customize) to speed thisprocess. To edit, zoom to a comfortable level (1:12,000) and slowly move across the townships in apattern which allows no areas to be missed (easiest to go township by township). When polygonsneeded to be reconstructed (the process of redrawing the parcel boundary linework), this was doneusing the sketch tool with either the create new polygon option or cut polygon option in theeditor toolbar. Using the sketch tool, with area highlighted, you can redraw the boundaries bycutting the polygons. Areas can be merged then recut to depict the underlying parcel map. If, forexample, a new development has gone in, many small parcels can be merged together to create a bigparcel, and then that large parcel can be broken into the parcels that were originally combined toform the subdivision. We can do this because the names in the attribute are not being preserved.This is a key note: THE OWNER NAME IS NOT A VARIABLE WE ARE CREATING, PRESERVING, OR OTHERWISEREPRESENTING. Once you merge the parcels, they will only maintain one of the names (and which nameis maintained is pretty much random). After the entire county is complete, go through again to checkthe new parcel shapefile, there will be mistakes. Snake through, going across the bottom one row ofsquares at a time. Examples of mistakes include primarily multi-part features that were exploded tochange one part, where the other parts would need to be re-merged. Another common correction arosebecause we typically worked on one township at a time, whereas ownership often crossed townships, soduring this second pass, we corrected cross-township ownership at the edges of the two scannedparcel maps. Finally, some roads which had been built into parcels (driveways) needed to be removedand these were not always caught during the first pass. Once the second run through is complete copythis shapefile so that it also has a back up.
Purpose
<p>Our purpose was to forecast detailed empirical distributions of the spatial pattern of land-use and ecosystem change and to test hypotheses about how economic variables affect land development in the Yahara watershed.</p>
Quality Assurance
<p>Accuracy was double check by visually comparing against corresponding plat book twice.</p>
Short Name
Historical Plat Maps of Dane County
Version Number
14

North Temperate Lakes LTER Vilas County Buildings

Abstract
Building locations in Vilas County, Wisconsin.
Dataset ID
147
Data Sources
Date Range
-
Maintenance
completed
Metadata Provider
Methods
For methods, contact the Vilas County Mapping and Land Information Office: 715-479-3655, mapping@co.vilas.wi.us
Purpose
<p>Mapping location of buildings in Vilas County.</p>
Short Name
NTLSP014
Version Number
24
Subscribe to buildings