Light Data Logger
Dumping Light Data
1. Log
in: LTERBC, Password: troutlake
2. Select
LTER Light Folder
3. Select
#1 Empty Logger
4. Select
21XLite from Station list
5. Connect
to logger
6. Collect
data from logger-make sure to browse the file name (found in
Groups>LTER>Data>LAKELITE>LAKELITE>04FILES)
7. Create
a file name: year(3)month(jul)day(26)# of dumps for that day(01 for the first
dump or 02 for the second).dat
ie. 3jul2601.dat
8. Check
status of logger and record the FS location and the number of FS words
9. Disconnect
logger
10. Close
all windows
11. Back
in LTER Light folder, select #2 Clean Files
12. Hit
Browse and select the file that was previously downloaded
13. Hit
Process File
14. Record
cleaned files names and battery voltage
Replace batteries if volts <11.4
15. Press
Exit and return to LTER Light folder
16. Go
to #3 View Cleaned Files
17. File-Open-lakelight-goodlight-03files
18. Change
“list files of types” to all files and select the file that was cleaned
19. Look
at the file and if the rations are descending in order then check it off in the
notebook
If the ratios are incorrect then open #4
View Raw Files and check the raw data ratios
20. Close
the notebook windows but leave the LTER Light folder open and log out
Reinstall
the Light Program
1. Log
into light2003
2. Go
to LTER Light folder
3. Select
#1 Empty logger and connect to the logger
4. Go
to send data logger program
5. Select
the file from O:LTER/Logger/liteprog/current
a. Select
the file name lite21X.DLD if the logger is the 21Xlite
b. Hit
OK
6. Go
to numeric for input locations
7. Enter
Cal Constant 1 for deck cell as a negative
8. Enter
Cal Constant 2 for Depth cell as a negative
9. Set
the data logger clock
10. Disconnect
from the logger and close that window
(reviewed
9/04 ams)